Installation Guide
How to Install Power
A day-by-day plan for installing the power run game. Pulling guards, kickout blocks, and a downhill running back hitting the hole at full speed.
Day 1: Pull Technique for the Guard
Power starts with the pulling guard. On Day 1, isolate the pull technique. The guard takes a short drop step with his play-side foot, opens his hips, and drives flat down the line of scrimmage. His eyes go to the point of attack immediately. He is not running a track. He is hunting a linebacker.
Drill the pull in isolation with cones marking the path. The guard must stay tight to the line of scrimmage. If he gets too deep, he is out of position to lead through the hole. If he gets too flat, he runs into the backside tackle. The path should be a slight arc that brings him to the play-side B-gap with his shoulders square and his feet underneath him.
Add a stand-up dummy at the point of attack on the second round of reps. The guard pulls, finds the dummy, and drives through it. Emphasize pad level. The puller who arrives standing up gets destroyed by a downhill linebacker. He must arrive low, with his hands inside, and finish with his legs.
Day 2: The Kickout Block
The kickout block creates the hole. The fullback, H-back, or tight end is responsible for kicking out the end man on the line of scrimmage. This is not a finesse block. The kickout player attacks the inside number of the defensive end, gets his helmet on the inside, and drives the defender outside the play. If the kickout block is wrong, the play has no hole.
On Day 2, pair the kickout player with a live defensive end. Start at half speed so the blocker learns the aiming point and the contact angle. The kickout must be aggressive enough to move the defender but controlled enough to maintain leverage. If the blocker gets too far outside, the defensive end squeezes inside the block and blows up the play.
Once the kickout is solid at half speed, combine it with the pulling guard. The guard pulls and reads the kickout block. If the kickout is clean, the guard turns upfield through the hole and leads on the linebacker. If the kickout is washed inside, the guard wraps around outside. These two blocks working together are what makes power go.
Day 3: Frontside Combo Blocks
While the guard pulls and the kickout creates the hole, the frontside linemen have to hold up their end. The center and play-side guard (or the play-side guard and tackle, depending on who is pulling) execute a double team on the play-side down lineman. One man climbs to the play-side linebacker when the down defender is controlled.
This combo block is critical. If the down lineman penetrates, he blows up the play in the backfield before the pull even arrives. Teach the frontside linemen to dominate the down defender first. Displacement is the priority. Get the defender moving backward, then climb. If the frontside combo is soft, the whole play collapses.
Day 4 and 5: RB Track and Full Team
The running back on power has a simple job. Aim for the play-side B-gap. Read the pulling guard. Follow him through the hole. Hit it north-south. Power is not a play where the RB makes multiple cuts. He sees the hole, trusts his blocks, and runs through contact. One cut, get downhill, and finish.
On Day 4, combine all pieces: frontside combo, backside cutoff, kickout, pull, and RB track. Run it against a scout defense at 80% speed. Watch for timing. The pull must arrive at the same time as the kickout. If the guard is late, the back has no lead blocker. If the kickout is late, the guard has no hole to lead through. Timing is everything.
Day 5 is full speed, full team, with a defense that wants to stop it. This is where you find out if your pulling guard can handle a fast-flowing linebacker and if your RB trusts the blocks enough to press the hole instead of bouncing outside. Power is a physical play. It rewards toughness. If your kids will run it with bad intentions, it will work at every level.
Pull Technique
The guard's first step, pull path, and eyes. A clean pull gets the guard to the point of attack with his shoulders square and ready to hit.
Kickout Block
The fullback or H-back kicks out the end man on the line of scrimmage. This creates the gap that the entire play is designed to exploit.
Downhill Track
The running back presses the play-side B-gap, reads the pulling guard's block, and runs north-south through the hole with no hesitation.
Downhill football that never goes out of style.
Power is the play you run when you need two yards and you want to send a message. Install it and own the line of scrimmage.